alloy gooseneck base?? and gardiner part help!

[Baldmonkey]

does anyone know where i could find one of these gooseneck bases (this is a gardiner one) or similar in alloy and not plastic!

also @Alex Gardiner do you no longer sell the highlited part individually for replacement? thanks

 

[ched999uk]

I think the companies that do roof scrapers have ali goosenecks. The problem might be that the roof scraping ones tend not to have a hole for the pole hose!
No idea about the swivel bit though.

 

[Pjj]

does anyone know where i could find one of these gooseneck bases (this is a gardiner one) or similar in alloy and not plastic!

also @Alex Gardiner do you no longer sell the highlited part individually for replacement? thanks

Gardiner’s still sell the sections separately go on there website it’s under gooseneck parts not gooseneck’s

 

[Baldmonkey]

Gardiner’s still sell the sections separately go on there website it’s under gooseneck parts not gooseneck’s

am i being a complete tool as i cant find that part anywhere the only ones i can see similar are the ones that have the square end section to add to the end of the goose neck and not an actual part of the goose neck

 

[Pjj]

am i being a complete tool as i cant find that part anywhere the only ones i can see similar are the ones that have the square end section to add to the end of the goose neck and not an actual part of the goose neck

Hear you go, they don’t sell euro threaded ones but there are what you want I think

 

[ched999uk]

I think @Baldmonkey is looking for the lower part of the swivel that has the circular notched adjuster that allows you to change the brush angle on the gooseneck.
From looking at the same page you show I don't think the part he wants is listed as anything other than a complete gooseneck.

 

[Pjj]

I think @Baldmonkey is looking for the lower part of the swivel that has the circular notched adjuster that allows you to change the brush angle on the gooseneck.
From looking at the same page you show I don't think the part he wants is listed as anything other than a complete gooseneck.

Here it is , all the parts are available separately

 

[Pjj]

This is from spinner clean but it’s euro thread , I have seen normal ones in alloy but cannot remember ware

 

[ched999uk]

Here it is , all the parts are available separately

I may be wrong but the bit he's after is the swivel part of the gooseneck that he circled in red play and ali version of the part of the gooseneck that fits in the pole.
Well that's my interpretation ?

 

[ched999uk]

I think this is an ali version of the bottom of the gooseneck but I don't think it has a hole for pole hose!!! 20mm Round Roof Scraper Pole Insert

or Rutland have this version: Flexi Scraper Water Fed Pole Insert

 

[Baldmonkey]

I think this is an ali version of the bottom of the gooseneck but I don't think it has a hole for pole hose!!! 20mm Round Roof Scraper Pole Insert

yeah thats what i want, going to make a dedicated roof cleaning pole... found that half an hour after i posted this thread ??? thanks ?

 

[Baldmonkey]

I may be wrong but the bit he's after is the swivel part of the gooseneck that he circled in red play an ali version of the part of the gooseneck that fits in the pole.
Well that's my interpretation ?

yep thats the one ?

 

[Baldmonkey]

Hear you go, they don’t sell euro threaded ones but there are what you want I think

Here it is , all the parts are available separately

This is from spinner clean but it’s euro thread , I have seen normal ones in alloy but cannot remember ware

cheers pal ?

 

[Pjj]

I may be wrong but the bit he's after is the swivel part of the gooseneck that he circled in red play and ali version of the part of the gooseneck that fits in the pole.
Well that's my interpretation ?

This bit then ?..it’s plastic but they are very robust I have not broken one yet

 

[ched999uk]

This bit then ?..it’s plastic but they are very robust I have not broken one yet

That part but with a the bottom half of the swivel built in. A whole new swivel gooseneck is only £10!

 

[Pjj]

That part but with a the bottom half of the swivel built in. A whole new swivel gooseneck is only £10!

This bit then ????, just pushes in the end of the other piece

 

[ched999uk]

This bit then ????, just pushes in the end of the other piece

I think it's this one https://gardinerpolesystems.co.uk/quick-loqr-angle-adapter-type-1-with-swivel-gooseneck.html ?
The one you linked too you need 1 per brush.

 

[Pjj]

I think it's this one https://gardinerpolesystems.co.uk/quick-loqr-angle-adapter-type-1-with-swivel-gooseneck.html ?
The one you linked too you need 1 per brush.

Yes that’s the new style gooseneck got several in them in the garage but don't use them as they don't work well with hoseless set up we still use the older ones

 

[ched999uk]

Yes that’s the new style gooseneck got several in them in the garage but don't use them as they don't work well with hoseless set up we still use the older ones

They work great with @Skxawng hoseless system

 

[Pjj]

They work great with @Skxawng hoseless system

I find the older style gooseneck works better as you can pull the hose tight through the gooseneck and then put a hose stopper on the end by the brush , you cannot tension the hose with the new style gooseneck