Neil
Well-known member
- Messages
- 3,733
I was told by someone that if i disconnect my hoses on the resin bottle and shake the bottle it should move the resin around in the bottle that doesn't get used and you can get it back to 0.00 is this true?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
How do you do that with out breaking the riser tubes and stuff? Can you get them back in if you take them out? (I have a 25l vessel)I used a plaster mixed on a drill and got 2 more weeks out of it
GREAT TIP Just tried it on my first resin tank that was reading 10ppm its now reading 5ppm before it hits my second resin tank! AWESOME! I used plastic pipe to stur it. Here is a tip that my also help you all. I run a 240 litre an hour system and supply water for 4 guys. I use two resin tanks. Heres why... If you use two 6.5 litre resin tanks only ever change 1 resin chamber at a time! Think about it, From my RO it comes out at 15ppm before it hits my first resin chamber, thats 15ppm hitting the first resin chamber. now i switch the two tanks over when the second resin tank that supples my 0ppm to two 1000 litre tanks starts to creep up and then change the resin in my first tank only, then put the first tank as the last tank that supplies the two 1000 litre tanks , so the second resin chamber that was originally the 0ppm tank is now the first tank. So what that means is instead of high ppm always hitting your resin you can have much lower ppm hitting your newly changed resin. This will make your resin last twice as long! If your Ro is producing 15 plus ppm hitting your resin why throw away good resin that is producing 5-10ppm?? Just switch the tanks!! Hope that makes sence!! lol I can make one 6.5 litre tank last 4 weeks for 4 guys using this method! Hope you understand this lolI was told by someone that if i disconnect my hoses on the resin bottle and shake the bottle it should move the resin around in the bottle that doesn't get used and you can get it back to 0.00 is this true?