Kirksheridan
Active member
- Messages
- 31
- Location
- Plymouth, Devon
Hi,
New DIY set up installed today.
blade right fitted pump controller
brand new 6mm hose
power up 3D reel
univalve with tubeless kit
pole set up works fine on my other van (facelift system)
however when using pole,
the controler every 5-10 secs stops reads DE for a 2nd then fires back up,
flow out of pole drops slightly then carries on.
it takes longer to switch to DE the lower the flow
30 flow 15-20 seconds
60 flow 3-5 seconds
ive calibrated it numerous times at various rate
auto calibrated
run 99 for ages
pulled hose out full length 3 times and reeled back in
cant think what else could be,
getting frustrated.
Many thanks
for all help
New DIY set up installed today.
blade right fitted pump controller
brand new 6mm hose
power up 3D reel
univalve with tubeless kit
pole set up works fine on my other van (facelift system)
however when using pole,
the controler every 5-10 secs stops reads DE for a 2nd then fires back up,
flow out of pole drops slightly then carries on.
it takes longer to switch to DE the lower the flow
30 flow 15-20 seconds
60 flow 3-5 seconds
ive calibrated it numerous times at various rate
auto calibrated
run 99 for ages
pulled hose out full length 3 times and reeled back in
cant think what else could be,
getting frustrated.
Many thanks
for all help