Tuffers
Well-known member
- Messages
- 10,918
- Location
- \_( ' ; ' )_/
Right, I know @Jake has fitted hose guide to his van and I have been thinking of doing the same for a while now. At present I leave my door open and work with a minibore hose with a protective disc and tap on it. I'm thinking of cutting a few inches off the hose and inserting a female 8mm EZ-Snap into the hose. On the tap I will have 2x EZ-Snap male connectors. On my pole hose I will keep the female EZ-Snap. This way I can have a quick release system so that I can connect the tap/disc on the outside of the door.
Now comes the difficult part. I'm going to buy 2x hose guides View attachment 6071
I will be fitting them to theses doors.
View attachment 6074
How would you do this, what size drill hole, I suppose nut and bolt to keep in place, but my main concern is keeping water out of the inside of the door if the outside is exposed. How would you cover the outer hose guide? My only option is to put them on the doors as putting them in the floor would mean me clambering under the van to connect the 2 parts of minibore.
View attachment 6072
View attachment 6073
Now comes the difficult part. I'm going to buy 2x hose guides View attachment 6071
I will be fitting them to theses doors.
View attachment 6074
How would you do this, what size drill hole, I suppose nut and bolt to keep in place, but my main concern is keeping water out of the inside of the door if the outside is exposed. How would you cover the outer hose guide? My only option is to put them on the doors as putting them in the floor would mean me clambering under the van to connect the 2 parts of minibore.
View attachment 6072
View attachment 6073