Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Thats a great combo- the pulex aluminium channel is made of aircraft alloy, its very strong and a lot lighter than the original wagtail channelI just need to explain my set-up before I go on. My main blades is a Wagtail with a Pulex aluminium channel,
I don't bend mine, it was the first way of dog-earing, and I didn't find it as good as cut and bend. But it might work OK with angle cuts, I might try it.The 45° angle on the ends and bending the corners down for the last 6-8mm means the rubber don't ride up the window rubber meaning a lot less detailingTo cut the rubber put it in the channel and cut like a straight squeegee then cut the angled bit off with sharp scissors..leaves the top edge with a little straight edge
Can you find it and copy/paste it here?Polzn bladz has a vid which is 26 min long showing you how to do the whole thing..90% waffle but worth skipping through minute at a time to see how he does it..called detailed analysis of blah blah blah..can't remember full name of vid