Are These Wfp Tecbuk Fittings Any Good?

[Squeak and Bubbles]

http://www.ebay.co.uk/itm/Water-fed-pole-conversion-kit-/321047414633?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D4566561893588964362%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D321047414633%26

Anyone used one, and how strong and sturdy are the poles, specially at 30ft?

 

[All Round Cleaning]

They a little wobbly at full stretch but they do the job .

 

[Squeak and Bubbles]

They a little wobbly at full stretch but they do the job .

Would you say on the same par as a 30ft fiber glass pole?

 

[All Round Cleaning]

Id rather use the fiberglass for stiffness at 30ft but they weigh a feckin tonne .

Dont think thd harris goes to 30ft does it ? I have a harris but cant remember .

 

[Squeak and Bubbles]

Id rather use the fiberglass for stiffness at 30ft but they weigh a feckin tonne . Dont think thd harris goes to 30ft does it ? I have a harris but cant remember .

if they weigh so much forget that lark.

 

[Belfastcleaning]

Harris is only 18ft. It's not heavy really, only thing that's pants is the Clamps are poo and the sections don't stick we'll, will spin /emoticons/sad.png

 

[Squeak and Bubbles]

Harris is only 18ft. It's not heavy really' date=' only thing that's pants is the Clamps are poo and the sections don't stick we'll, will spin /emoticons/sad.png[/quote']Stick to the gardiner pole then I will (i sound like Yoda)

 

[david247]

i can make one my self for less price out of old gear that iv got

 

[Dodger]

I use a Harris all the time and it does the job but only to 1st floor, it's very bendy and it is heavy when you're over connies etc which is basically what I want mine for at the minute so I'm replacing it.

If funds are tight which they were for me then they're great for the money but if you have the money buy better. As for the Tecbuk conversion kit, I can't see Richard selling something of poor quality to be honest so should be good for the job.

 

[Squeak and Bubbles]

I use a Harris all the time and it does the job but only to 1st floor, it's very bendy and it is heavy when you're over connies etc which is basically what I want mine for at the minute so I'm replacing it.
If funds are tight which they were for me then they're great for the money but if you have the money buy better. As for the Tecbuk conversion kit, I can't see Richard selling something of poor quality to be honest so should be good for the job.

I'll have a chat with Richard. Cheers