Claber Hozelock not turning on the reel

[JEM]

Hey all
Just started having an odd thing where when pulling the hose off the Clover type reel instead of the Hozelock spinning the hose is twisting instead, seems like there is a bit of resistance of the Hozelock, does the O Ring need lubing from time to time? If so with some grease or would dry PTFE spray do the job

 

[Deleted member 7446]

Hey all
Just started having an odd thing where when pulling the hose off the Clover type reel instead of the Hozelock spinning the hose is twisting instead, seems like there is a bit of resistance of the Hozelock, does the O Ring need lubing from time to time? If so with some grease or would dry PTFE spray do the job

If your not using a hose reel swivel and just a hoselock fitting the nylon paws which grip the fitting are wearing with friction

 

[JEM]

If your not using a hose reel swivel and just a hoselock fitting the nylon paws which grip the fitting are wearing with friction

Yes the end I push on the Claber small size Hozelock, Ok so its wearing out then thought might be the rubber o ring
I need a different type of connection then

This is the connection type if you can see it in the photo

 

[JEM]

So this is what i need then I never knew there was such a thing

 

[Deleted member 7446]

So this is what i need then I never knew there was such a thing

Yes that's what we all use as standard but but a quality one with HEX keyway in it so that it's serviceable