ECOSTREAM ™ 700 Ltr Upright Tank system

[Jeff Hillman]

hHI I HAVE ECOSTREAM ™ 700 Ltr Upright Tank system I HAVE TAKE THE CONTROLLER OUT AND  PUMPS TO CLEAN THEM AND REPLACE  I HAVE 2 PUMP CONTROLLERS  THE 1ST ONE HAS GOT  8 WIRES  I DONT NOW WERE THEY GO  CAN ANY ONE HELP OR HAVE WIRING DIAGRAM FOR THESE  ILL POST SOME PICTURES CHEERS 

 

[Baldmonkey]

they are the same controllers as "spring" who if im right manufacture for various places under different names, the one with more wires is generally going to be for remote transmitter or to act as a battery relay for battery charging i think, search spring controllers and youll find the wiring diagrams

my home town leyland...pleased to meet a fellow leylander

http://springltd.co/support

 

[spruce]

This thread might help you.



There is a wiring schematic for one of the pumps. There is also another poster who has Ian Sheppard's contact details.

I don't know what controller the second one is with all those extra wires.

There are many different Spring controller models that incorporate other features, ie Frostat for a diesel heater, leisure battery charge wire,float switch wiring for solenoid valve for r/o control when the tank is full, etc.

 

[Jeff Hillman]

I THINK MINE IS THE VARIABLE CONTROLLER WITH AUTO SHUT OFF FUNCTION ?

 

[Jeff Hillman]

LOOKING FOR WIRING DIAGRAM FOR THIS CONTROLLER  PLEASE IF ANY ONE CAN HELP TRYED STREAMLINE FOR HELP ALL THEY SAY IS DID YOU BUY IT FROM US 

 

[Nudel]

Why on earth would they be a scrounge with their wiring diagrams? That ought to be public information easily available.

That said most controllers have four wires, two to battery, two to pump. Take notice of positive and negative leads.

The one you have pictured have many more wires, so it could be used for a remote or other sensors? You might be able to figure it out if you open it but you probably need the wiring diagram.

 

[Don Logan]

Try an auto electrician, they are good at that sort of thing.

 

[Jeff Hillman]

CHEERS 

 

[Baldmonkey]

again as stated in the other post you put on, this is based on a "spring" manufactured model and they will be the best port of call for you....spring....ring....or message

 

[spruce]

I THINK MINE IS THE VARIABLE CONTROLLER WITH AUTO SHUT OFF FUNCTION ?

If you email Ian Sheppard with all the details on the back of the controller he will provide you with a wiring diagram. Unfortunately you won't get it sorted this weekend, but he's usually quick to respond when he's back in the office and a really helpful person, aren't you @Ian Sheppard.

 

[spruce]

LOOKING FOR WIRING DIAGRAM FOR THIS CONTROLLER  PLEASE IF ANY ONE CAN HELP TRYED STREAMLINE FOR HELP ALL THEY SAY IS DID YOU BUY IT FROM US 

Try this





Here's more detail

http://springltd.co/v11-auto-fill

 

[CMcB]

This might be the one you're after. The other part is in the thread mentioned by @spruce

 

[Iron Giant]

@Jeff Hillman I have merged both your posts as they cover the same topic and will hopefully save you skipping back and forth between two posts for the info you require. 

 

[Ian Sheppard]

Many Thanks to Spruce and Iron Giant covering this one.

Jeff As above this is a v11 Auto Fill controller the additional Yellow wires are for teh Float Switch and the Grey/White are to connect the Solenoid.

Any issues please do drop me a message

Cheers