Garden water butt

[Paul]

Ive got a 300l water butt in my back garden checked the ppm it's 7/10 how would I get enough pressure out of it to run it through a DI vessel without buying a pump ?


It does have a tap but the water doesn't come out to fast

 

[best]

to run through di vessel only you will need to have the bottom of the water butt higher than the Di vessel.

I dont think the di requires much pressure

Stack the water butt on breeze blocks and give it a try

you might want to use some sort of filter first (to collect leaves, dirt etc)

 

[mark m]

Ive got a 300l water butt in my back garden checked the ppm it's 7/10 how would I get enough pressure out of it to run it through a DI vessel without buying a pump ?


It does have a tap but the water doesn't come out to fast

[/quot

if it is 7ppm then it would be fine to use without going though a di

 

[Paul]

It doesn't look the cleanest of water can't understan how the ppm is so low think I might empty it give it a good clean out and try again

 

[mark m]

It doesn't look the cleanest of water can't understan how the ppm is so low think I might empty it give it a good clean out and try again

get the wife tights at the end of the down pipe that acts as a good filter

 

[Paul]

But the water looks quite merky so I would say it would Need DI but would It ruin my resin

 

[mark m]

But the water looks quite merky so I would say it would Need DI but would It ruin my resin

rain is not dirty you must have **** at the bottom of your water butt

 

[Paul]

Yeh must have think I will empty and clean it