- Messages
- 4,288
- Location
- Gloucestershire
I thought my sediment filter was a little grey, not due for a change for another few thousand litres but I did it anyway. The filter was very grey and I had seen a slight drop in pressure the end of last week, I flushed the new filter and then set the RO to flush and all good at first. Within 5 minutes the filter was more grey than before. Took it off to find the mess pictured.
The water in the area went off today, believed to be a leak. The pressure has apparently been low all day so people are reporting. The water board have advised to run the tap for 20 minutes to clear any discolouration.
My questions.... anyone experienced this before, how long does it generally take too sort itself out. Is there any chance I have caused damage to my membrane?
I assume this filter is not f**ked, can't really afford to go through these at that sort of speed.
The water in the area went off today, believed to be a leak. The pressure has apparently been low all day so people are reporting. The water board have advised to run the tap for 20 minutes to clear any discolouration.
My questions.... anyone experienced this before, how long does it generally take too sort itself out. Is there any chance I have caused damage to my membrane?
I assume this filter is not f**ked, can't really afford to go through these at that sort of speed.