Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Hot water unit not firing up

WCF

Help Support WCF:

Could be something as simple as the flow, mine plays up if I switch to pencil jets or I have played about with the pipe work (which it did when I re-plumbed a section and it got a tiny airlock in it). Crank your flow up on the controller and see if that makes any difference. Other than that the flow switch could have gone?


Sent using the Window Cleaning Forums mobile app

 
I guess the ignition is battery powered.  

Change the batteries.   I had same issue.  It was enough power to spark the ignition but not enough to arc.  I know it makes no sense but that was the issue. Batteries too low. 

 
Just tried some new batteries didn't work checked all the wires and connections are good wiggled some wires around gas supply seems good but same  just fires up instantly goes out..not sure what's going on. 

 
Mine was doing that , noticed water dripping down the chimney that goes through the van roof , once it dried up it ran fine , I sealed up the leak and all was good again [emoji106]


Sent from my iPhone using Tapatalk

 
Back
Top