How may of you have tried vision yet

[Smurf]

You where closer the first time /emoticons/biggrin.png

http://www.wydaleproducts.co.uk/products/cat/3/wydaletanks/

ok wyevale then

 

[kevinc250]

No.

so you don't have a lid on your tank shazzy? what type is it?i'll get the spelling wrong i guess

 

[shazzy692002]

No don't take lid off to fill, it connects with a hose connection......Ionics is ionics haha. don't no what wyvale is sorry

 

[kevinc250]

No don't take lid off to fill, it connects with a hose connection......Ionics is ionics haha. don't no what wyvale is sorry

ok shaz,with an ionics tank,the black one i assume,they'll be a vent hose at the top 1/4 of the way in from memory,you can use vision added to a jug and add a bit of pure to the jug to make it more fluid,then use a funnell and pour the pre-mixed vision into the funnell,used it that way for a while till i bought a pure freedom one where i now just pop it into the tank via the lid-hope this helps

 

[shazzy692002]

Ok day 2.

Got van out this am, no smelly again.....feeling disappointed, I decided to unscrew my tank and put vision in direct....

First 2 houses next to each other, lovely windows to clean, these cleaned superbly and quick, especially the rinsing, good start me thinks....

The rest of the day went smoothly, on good windows where the water runs down in a lovely stream, this vision stuff is good stuff.

On windows that don't run down well, and leaves drips of water on, this vision did not make my life any easier or quicker.

Overall today I have more water left over that I normally would and I am home earlier. So today I am not disappointed, I look forward to seeing what tomorrow brings.

I still had no smell and no bubbles....

Today I am pleased with the product.

To be continued(yes I am working on xmas eve, yes I am gutted yes I will be going to pub when I am finished. )

 

[Dave B]

I am working tomorrow also shazzy

Fascias and gutters day

 

[Natty1972]

Going back to the question ,, I was one of three testers before it came out to buy , I'm having mixed results at the minute , I've decreased the amount of vision I'm using in my pure barrels , found my brush was gliding over the glass to much . It also could be I was working too fast , I'm still testing on speed ,,,,,

 

[Duncs]

tuffers sure shaz has a RO

 

[Sam Hodgson]

Hi all, sorry for reviving this 3yr old post from the grave but what was the outcomes with vision? Are you all still using it? I’m new to the whole wfp system after finally switching over from traditional.

 

[Green Pro Clean Ltd]

I use Vision Blue one cap full per 500L tank. Lasts ages. 

I reckon it does leave a better finish. 

As for 'changing the DNA of the glass? Bol***ks!

 

[Marko067]

I tried the first two versions of it neither of which made a significant difference for me. So now I just use pure water.  Experiences seem to differ wildly however, so I'd say try it and see.

 

[Sam Hodgson]

I like the idea of the smell ? and also I like the idea of customers being able to see bubbles so it’s gives the effect that we’re actually using cleaning product as many of my customers are still dubious about the fact I’m ‘just spraying it with water and leaving it’

the only concern I have about the foam is as Smurf mentioned it is hard to see any bits left particularly on cons roofs.

 

[Jimbo]

I love it, really do think it leaves an extra shine, brings frames up brilliant too. For the small cost and how long one bottle lasts I think its definitely worth using. Like most comments though, it really doesn't change the glass DNA

Sent using the http://Window Cleaning Forums mobile app

 

[RWCleaning]

I used V2 about a year/15 months ago, I used it for 2 days, the first day I found it was leaving mercy smears that would only go away if you wiped them off with a microfibre afterwards. I rang the guy, he said that’s weird etc and even made up some **** that ‘it sounds like it’s cleaning out your tank’ he said ‘give the bottle a really good shake and add it when I’m pumping water from my storage tank. I did and still wasn’t happy so I throw the bottle away in annoyance. I personally think v2 is too concentrated.

Then back in the spring I bought the original clearV. No problems with it, but the finish is Exactly the same (in my + 2 customers opinions) each to their own 

 

[Dave B]

I have tried all sorts of additives

Find the right one for you and you'll never go back to just pure again

 

[adamangler]

Tried original vision but didn't notice anything really part from bubbles.

 

[paul1]

ive heard its good but for me personally ive never had a complaint as yet about my results in 3 years and most say windows gleam just using pure water so for me I canot see the point in adding further business costs even if it is only small if the the results are already good enough, each to there own though

 

[dmw]

So have I got this right? You go to the cost and effort to bring your water down to 000ppm and totally pure, and then buy an additive to add to your totally pure water? Have I missed something here?

 

[Dave B]

If you can find something that won't affect the drying on the glass but will help give a deeper clean or something that leaves the glass even shinier why wouldn't you use it?

I'm trying something out at the moment that stops a lot of spotting issues and cleans brilliantly

No reason not to add a little to my pure

 

[Dave B]

And who says i use 000ppm anyway

 

[Green Pro Clean Ltd]

So have I got this right? You go to the cost and effort to bring your water down to 000ppm and totally pure, and then buy an additive to add to your totally pure water? Have I missed something here?

I have vision and Iso propoanol in my tank.  My water is still 000ppm so yep I use pure water.