How to turn off control panel for my ego system ?

[Matt steel 118]

So usually I just hold enter then it turns off but it's flashing (fil) and won't switch off any advise ? Cheers 

 

[marc674]

The easiest way to turn it off would be to adjust the settings with the biggest hammer you have, then enjoy the evening in the pub !

 

[Matt steel 118]

The easiest way to turn it off would be to adjust the settings with the biggest hammer you have, then enjoy the evening in the pub !

Wfp also not ego?

 

[Part Timer]

Press the up and down arrow simultaneously, you've pressed them and instruction is to fill

 

[Ian Sheppard]

So usually I just hold enter then it turns off but it's flashing (fil) and won't switch off any advise ? Cheers 

If your controller is an auto fill unit, Fill will run with the controller powered on Or off. So even when the controller is powered off by pressing and holding the enter button Fil will display. 

The newer auto fill controllers allow you to set either One time fill Or Fill on demand ( FOD) if this is set to on then each time the float switch drops in the tank the controller will open the solenoid and start a fill.

Setting FOD to off gives a one time filling operation as needed.

this video covers it better than me