New system build

[Eviestevie]

im currently working on new system build

We're fabricating a pull out steel roller system with swivel so the reels will be on the outside off the van when working

Also does anyone know if there are any clear di vessels?

 

[noddy]

theres system like this that are used in the usa designed for pick ups there quite cool

 

[Eviestevie]

theres system like this that are used in the usa designed for pick ups there quite cool

I seen the American ones which gave me the idea off slide out reels

I'm replacing my di vessel it's a bit tatty now but thought be good idea to use clear one to see the flow through the resin but can't locate one

 

[A.K WINDOWS]

I've seen two vans with reels on the outside I think they just hooked it on some hooks then take it off when done looked OK but as always the hose was too high up for me liking.

Sent using the Window Cleaning Forums mobile app

 

[Eviestevie]

This will be on a slide out puller system with rotating swivel

Hoping it will eliminate all the need for roller guides etc and making holes all over van

 

[Jonathan Sanderson]

This is what I use, can go 90 degrees and even further from the back of the van. Grilpatank sell these.

 

[Jonathan Sanderson]

The main benefit of floor rollers is security. I can have the van locked and work with van doors shut.

I'm Guessing you would need the back doors open for what your making?

 

[Eviestevie]

Side door on mine

Security never been a issue really I've never locked my van while working there's not much they could take really without making a lot of noise

 

[GSS Window Cleaning]

I have my 2 hoses on the outside of my van there hooked on too a rear door ladder there awesome saves me loads of time setting up, literally pull the hose out and reel in when needed then at the end of the day I take them off and put them in the van takes me 5 mins ill take a pic tomorrow for you. But here's a idea of what it looks like when i work alone obviously I have another reel hooked on above the other reel when there's two of us. I used to have my pole on the back aswell saves keep attaching it.

 

[A.K WINDOWS]

This is mine never used a roller works a treat I just put a hole threw floor and smoothed it off miles better no raised hose for anyone to trip on or owt.

Sent using the Window Cleaning Forums mobile app

 

[kevinc250]

I seen the American ones which gave me the idea off slide out reelsI'm replacing my di vessel it's a bit tatty now but thought be good idea to use clear one to see the flow through the resin but can't locate one

i have a clear di filter eviestevie,stephen scargill made it for me for when i install my new stystem,you can make a re-fillable filter from an ionics clear vessell though that might answer your question

 

[Chris Dall]

Home Page | Van Racking Systems

Speak to these guys, just bought some bits from them, they have a ready made sliding unit that takes a pretty hefty payload

 

[jack b]

I have my 2 hoses on the outside of my van there hooked on too a rear door ladder there awesome saves me loads of time setting up, literally pull the hose out and reel in when needed then at the end of the day I take them off and put them in the van takes me 5 mins ill take a pic tomorrow for you. But here's a idea of what it looks like when i work alone obviously I have another reel hooked on above the other reel when there's two of us. I used to have my pole on the back aswell saves keep attaching it.

I'll look forward to seeing some close up pics of this reel on the outside of the van. Been considering doing something like this as am a bit fed up of pulling the reel out of the van and back in again fifteen times a day. I have some reservations about keeping the reel in the van and making a hole in the floor to pull the hose through. Also a little concerned about the hose reel connections leaking water onto the van floor under pressure as mine do now a little.