Pole Snaped

[iluvwindows]

cheers lads

 

[iluvwindows]

attached is a pic of the snapped thread anyone know where i could get one from??http://i1048.photobucket.com/albums/s366/crickey6/DSC02669.jpg

 

[Belfastcleaning]

B and q get a Harris broom handle about £3, you could use that thread if it fits into the end of the pole section? There are a few different threads about for the ends of poles think I seen them on ebay

 

[iluvwindows]

bought a harris today too big, do you have a link for ebay threads belfast?

 

[Belfastcleaning]

http://www.wfp-brush.co.uk/shop

See a couple there, ask Richard on here to see if they will fit..

What pole is it you have?

 

[iluvwindows]

N-Tech Glassfibre 17 ft

 

[Alex Gardiner]

You should be able to repair this fairly easily. First of all you will need to buy a new top screw thread. I would recommend buying an alloy one instead of the plastic one fitted. You can probably purchase the original type from Pure Freedom or an alloy one from the link given above.

To fit this you may need to saw a little more off the end of your pole to get rid of the remains of the snapped screw. Once removed use any epoxy two-pack resin glue to bond this in, making sure that you lightly sand both surfaces first and then apply glue to both surfaces before twisting together.