Diamond geezer
Well-known member
- Messages
- 522
- Location
- greater london
I run two di chambers.filled no 2 with fresh 115 resin,output from 1st di 3,rose to 4,ok.Put through only2200 ltrs,fresh resin was now reading 4.What i,thinks to myself that's not enough.Ive had conversation with two separate supliers,about resin usage.One says 500000 divided by tds will give no of ltrs per 25k bag.so if tds is 10,should get 50000ltrs.The other says 600000 divide by 25(kilo bag)multiply by no of ltrs of resin in di chamber,mines a 7ltr,then divide by tds.Taking the tds as 10 again the result is 16800.Who do you thinks right please.I visited resin calculator, WCW,and that showed I should be getting a hell of a lot more,than I got.I was advised to check, di chamber riser. Put bottom bit sealed in a poly bag water then should,nt come out of outlet,if it does problem,well it didn't.Next check top of riser tube should be perfectly round,if not cut of smallest amount.Mine looked as if melted a bit,aparently this can happen in hot weather plus preasure.Well ive done this,so we shall see.Thanks