[SOLD] Brodex twin tanks 500ltr for DIY van mount

[AGlassAct]

Brought these recently to upgrade my van. I really haven't the time and 500ltrs is on the large side for my 750kg payload van. I was going to split and add controllers and pumps to sell separately but -again- have lost all enthusiasm as I still need to sort my own tank and filtration out.

Comes with the 25ltr resin vessel, 4020 RO housing and mounting straps. Does not have the auto shut off so this will need to be added if you want that function.

Easy project for someone wanting a DIY van mount.

I filled with tap water to leak check and it is water tight.

I have fitted some John guest 90 degree isolation valves in place of the original connecting hose, I will include a length of 15mm pipe to finish it off.

£225

Sent from my iPhone using Window Cleaning Forums mobile app

 

[AGlassAct]

Located in Burton-On-Trent for collection only. I can provide a varistream analogue controller and shurflo pump without pressure switch if needed.

Sent from my iPhone using Window Cleaning Forums mobile app

 

[peter rogers]

Bargain wish was in england

 

[Green Pro Clean Ltd]

Same setup in my van.

Surprised no one bit your arm off at that price. If still available I can take it off tou at the end of June mate

 

[AGlassAct]

I'm surprised too to be honest. I paid a bit more than what it's listed for but got some resin with it so not losing out too much. If I could be bothered to kit it out with controllers and pumps I would get good money for it on eBay. Would rather be cleaning though [emoji41]

Sent from my iPhone using Window Cleaning Forums mobile app

 

[Eviestevie]

Does the ro mount on the tank

 

[AGlassAct]

Yes it does Eviestevie. I have the brackets and screws to go with it too. It would need a pre-filter and prob a carbon filter if you were going to go the whole hog with something like this . It has plenty of screw holes to attach stuff to.

Sent from my iPhone using Window Cleaning Forums mobile app

 

[Eviestevie]

Ok I'm not familiar with brodex systems

So if I was to have it would i be able to mount controller,prefilter and ro all face of the tank only its for lads van and need to set it up so he can fill at his

 

[Green Pro Clean Ltd]

Same set up I run Steve, add a carbon & sediment pre filter, controller and pump and your're all set.

 

[Eviestevie]

Do you have a pic green off the filters and ro in place

 

[AGlassAct]

Look at 331862130295 on eBay, it's a completed listing but is the exact same tank - this is for two tanks strapped together. If you look at the RO housing the one I have doesn't have the hose connection directly above it.

Sent from my iPhone using Window Cleaning Forums mobile app

 

[Eviestevie]

Ok well I'm interested

I take it I'd have to run a hose between the first tank and into the second to fill both tanks

 

[AGlassAct]

Yes, I have fitted some John guest isolation valves and have a length of 15mm pipe to connect. They run between each other and connect at the bottom. You can wire it up and plumb it however you like then. How far away are you? Are you close enough to come and have a look? My postcode is DE13 9TQ if you want to check distance

Sent from my iPhone using Window Cleaning Forums mobile app

 

[Eviestevie]

Your not far

Is there a outlet to fit a hose to fast fill a trolley?

Or is it just the 2 outlets that will be joined

 

[AGlassAct]

Think there are four outlets in total. One is blanked off right at the bottom near where the RO sits and another blanked next to the existing rectus 26 fittings. You could easily add outlets with simple through bulkhead connectors, that's what I did to modify my tank.

Sent from my iPhone using Window Cleaning Forums mobile app

 

[Eviestevie]

Think I'll take these

Going to measure up tomo

 

[AGlassAct]

Let me know if you want the measurements EvieStevie I will dig a tape measure out, from memory they fit in my current van with the existing tank still in ( when I picked them up ) and I only had 960mm X 1200 spare so I know the width is about 960 and the depth no more than 1000mm.

Sent from my iPhone using Window Cleaning Forums mobile app

 

[Eviestevie]

Ok mate will fit all he will be having is tanks and reel in van

So when you fill the tank is there a overflow at top so then it goes into second tank?

 

[AGlassAct]

It's at the bottom, otherwise the water wouldn't drain from both fully . If you look at the second picture it's the grey valves at the bottom on the left corner. They are the valves I replaced with speed fit isolation valves.

Sent from my iPhone using Window Cleaning Forums mobile app

 

[Eviestevie]

Ok I see now lol

Last question do you have the ro mounts to mount to tank And is all the pipe work from ro to do vessel etc

 

[AGlassAct]

Yes it has the RO mounting brackets, it's just the housing with no membrane or connectors or hose. The pipework is internal as far as I can remember for the DI, I think it connects to the pump and then goes to one of the outlets - don't quote me on that though as I am not 100%! Personally I was just going to take it all apart and start again - but I'm a bit OCD when it comes to things like that!

Sent from my iPhone using Window Cleaning Forums mobile app