Resin chamber inlet/outlet

[Mikej]

Hi Guys, might sound like a silly question. Is there anyway to tell which way is the inlet and outlet?
It used to have a sticker on top but it peeled off a while ago.
I have been guessing at which way, it doesn’t seem to make any difference, unless I have guessed the right way each time.

 

[Pjj]

Look on the riser head it should say in and out under the ports

 

[Mikej]

Great, I’ll have a look. Is that the bit on the inside?

 

[Mikej]

Look on the riser head it should say in and out under the ports

Took the head off and looked under and all over but nothing to suggest inlet or outlet

 

[Pjj]

Took the head off and looked under and all over but nothing to suggest inlet or outlet

It should be on the outside on the black plastic under the threaded holes all mine have either in or out in raised lettering on them

 

[Mikej]

It should be on the outside on the black plastic under the threaded holes all mine have either in or out in raised lettering on them

Can’t seem to see anything on mine

 

[Mikej]

I know when I connect the hose to the chamber, water either comes out from the top and the other side from the bottom. If anyone knows which it’s supposed be

 

[ched999uk]

I think water in should be to the centre and feeds the bottom then the water has to go through the resin and out the top.
Hopefully someone will confirm this.
The outlet side should be the finest mesh.

 

[Part Timer]

If you connect it up with centre in if resin comes out with the water you have it the wrong way round

 

[Mikej]

If you connect it up with centre in if resin comes out with the water you have it the wrong way round

Would you see the resin come out in the water?

 

[Part Timer]

Would you see the resin come out in the water?

Should do put catch in a vessel and check

 

[Gerry Scrimshaw]

Water should come out of the centre pipe, it has the filter mesh to stop resin beads escaping with the pure water