Stuck setting pole up

[Swasher]

Bought a Facelift pole and seem unable to attach brush head .. am i missing a part or not doing it right

 

[Pjj]

Your pole is euro thread and brush goose is designed to go inside the pole you need a euro socket for the brush and a euro gooseneck

 

[LeeWard90]

 

[Part Timer]

Can you not just unclamp the euro thread and remove it then insert the brush gooseneck

 

[Dave B]

You bought the brush with gooseneck so the euro thread one that comes with the pole is superfluous to requirements.
I have a couple of phantom poles and use the euro adaptors to turn poles into trad poles if needed

 

[Iron Giant]

superfluous

have you been drinking again or just reading a dictionary in your spare time, superfluous, unnecessary, especially through being more than enough

 

[Swasher]

The gooseneck feels a bit too small tonslot in and be sturdy …i will try again but tighten the clamp a bit more

 

[Iron Giant]

The gooseneck feels a bit too small tonslot in and be sturdy …i will try again but tighten the clamp a bit more

Just tighten it all the way up as it won't be coming back out, Gardiners send their pole out and it's a tight fit initially but I'm guessing the Phantom poles allow a bit more room so easier to slot in a resi neck or Goosneck and more easily removed

 

[Prestigious_Shame_58]

I think there’s two size goosenecks , size 0 and size 1 , size 1 is thicker

 

[Prestigious_Shame_58]

Just checked WCW site.
Standard size angle adapter (gooseneck) fits clamp O on phantom poles

Large size angle adapter (gooseneck) fits clamp 1 on phantom poles ??

Hope this helps

 

[Prestigious_Shame_58]

Just checked WCW site.
Standard size angle adapter (gooseneck) fits clamp O on phantom poles

Large size angle adapter (gooseneck) fits clamp 1 on phantom poles ??

Hope this helps

Standard - To fit clamp AA (Phoenix) or 0 (Phantom), suitable with All Phoenix Poles & Phantom Poles 18ft-30ft

Large - To fit clamp A (Phoenix) or 1 (Phantom), suitable for Phantom poles 35ft or 40ft, and all Renegade poles

 

[Swasher]

Just checked WCW site.
Standard size angle adapter (gooseneck) fits clamp O on phantom poles

Large size angle adapter (gooseneck) fits clamp 1 on phantom poles ??

Hope this helps

Thank you for checking mate appreciate that … im brand new to pole and don’t know what im looking for … i think i deffinately need a thicker gooseneck as like you say it doesn’t fit clamp1

 

[Swasher]

Just tighten it all the way up as it won't be coming back out, Gardiners send their pole out and it's a tight fit initially but I'm guessing the Phantom poles allow a bit more room so easier to slot in a resi neck or Goosneck and more easily removed

It deffinately too loose for clamp 1 even tightened fully

 

[Swasher]

Sending me a wider fitting adapter … many thanks everyone
Stay safe ?