Water problem

[Shaun1977]

Checked reading of water in my tank today and was shocked it read 16 then read it straight after the di vessel and only reads 2 what the hell is going on

---

I am here: http://tapatalk.com/map.php?o0ymxj

 

[Paul]

I'm guessing u are running it through a RO? When were the filters changed and same with resin, the resin must be done not to polish the water from 16 to 0


Ah sorry miss read that so it's gaining 14ppm from the Di to the tank ?

 

[Shaun1977]

No mate it's 002 after di that's what I can't understand but it's higher in my water tank in van

---

I am here: http://tapatalk.com/map.php?b0uzkq


I don't use ro unit only use di

---

I am here: http://tapatalk.com/map.php?wokmi0

 

[Paul]

There must be contamination somewhere from the Di or in the tank or was the water already in that's mabie higher ppm


Mabie try DI after the tank see how it goes

 

[Shaun1977]

Solved it it's 002 out of the di vessel but once I put hose pipe on it contaminates it

---

I am here: http://tapatalk.com/map.php?hff2p5

 

[Paul]

New hose it is then /emoticons/biggrin.png