Josh Foster
Well-known member
- Messages
- 57
- Location
- Liverpool
I have a diy wfp trolley it has been working fine for about a month. It has a Pentair shurflow pump 5.3 lpm a basic flow controller a battery and I have a flow tap on my hose now water will not pump through the brush head the pump
Is working but no water is coming through the pole. The flow tap doesn't seem to be working because when I turned the flow tap off it would stop the pump this isn't working now. When I have had this issue before I have disconnected the pole hose from the brush turned it on put flow controller to the max and it has cleared the airlock but that isn't working. any help much appreciated thanks in advance
Is working but no water is coming through the pole. The flow tap doesn't seem to be working because when I turned the flow tap off it would stop the pump this isn't working now. When I have had this issue before I have disconnected the pole hose from the brush turned it on put flow controller to the max and it has cleared the airlock but that isn't working. any help much appreciated thanks in advance
Last edited by a moderator: