Jump to content

Don't want to see ads? Become a subscribed member.

Warrior waterfed trolley setup


marlyg

Recommended Posts

Hi folks

first post ...be gentle  ;o)

so i have a Warrior waterfed trolley setup,  its the 12.5lpm version.   coupled with the following

Economy Soft Wash Wand  softwashuk 

and for the pole a "Chemical Application Nozzle" with a choice of 2x cone and 2x fan jets from window cleaning warehouse.

 

my issue is  as soon as introduce wfp hose  the output is underwhelming to say the least.    i have now checked  the flow direct from the window warrior trolley and confirmed its outputting 12.5ltpm no problem there, I tried connecting the lance to the warrior with standard hose the fan is not too bad and the pencil has a around 3 meters throw, but with microbore attached its pretty poor as are both pencil and fan jets on the pole, which obviously needs to be pole hose no choice.

as a third option i also tried it on an old unger brush with fan jets and again not great.

 I have read many positive reviews of the warrior and recommendations on here and as i said its def pushing out 12.5lpm direct out the system... so what am i missing?

any thoughts appreciated

Glen

 

 

Edited by marlyg
Link to comment
40 minutes ago, marlyg said:

Hi folks

first post ...be gentle  ;o)

so i have a window warrior,  its the 12.5lpm version.   coupled with the following

Economy Soft Wash Wand  softwashuk 

and for the pole a "Chemical Application Nozzle" with a choice of 2x cone and 2x fan jets from window cleaning warehouse.

 

my issue is  as soon as introduce wfp hose  the output is underwhelming to say the least.    i have now checked  the flow direct from the window warrior trolley and confirmed its outputting 12.5ltpm no problem there, I tried connecting the lance to the warrior with standard hose the fan is not too bad and the pencil has a around 3 meters throw, but with microbore attached its pretty poor as are both pencil and fan jets on the pole, which obviously needs to be pole hose no choice.

as a third option i also tried it on an old unger brush with fan jets and again not great.

 I have read many positive reviews of the warrior and recommendations on here and as i said its def pushing out 12.5lpm direct out the system... so what am i missing?

any thoughts appreciated

Glen

 

 

What psi is the pump.

If it's a low psi one which being such a big flow probably is the pressure switch is more than likely cutting it and cutting the pump out intermittently to keep the pressure within designed parameters.

Link to comment

I have one and it’s used for soft washing and chemicals, application not window cleaning ,but dont  have a problem with flow rate especially when doing roof jobs 

Link to comment

As it happens it was one of your posts brought the system to my attention,   im going to revise my original post,  in hindsight the spray from the window cleaning warehouse pole attachment on microbore with the fan jet is probally fine,  i think i was using the 90,  65 would probably be better.

I am coming to the conclusion the lance from softwashuk or rather the nozzle isnt that great with microbore hose so for now i guess ill have to use normal hose.    what lance do you use for low level application of chems?

 

 

 

Link to comment
6 minutes ago, marlyg said:

As it happens it was one of your posts brought the system to my attention,   im going to revise my original post,  in hindsight the spray from the window cleaning warehouse pole attachment on microbore with the fan jet is probally fine,  i think i was using the 90,  65 would probably be better.

I am coming to the conclusion the lance from softwashuk or rather the nozzle isnt that great with microbore hose so for now i guess ill have to use normal hose.    what lance do you use for low level application of chems?

 

 

 

I use a wfp with a softwashing nozzle from Ben Marriot at Rutland pumps 

0943AF05-A4D8-4E1C-90F3-8F34C693C5AC.jpeg

2D0E447F-09DD-4125-949D-9CDA1FCD1A75.jpeg

90667280-5152-4A9B-B789-5B0796876F89.jpeg

Link to comment

thank you,      my kit comes with 

65° Flat Fan Nozzle  90° Flat Fan Nozzle  50° Full Cone Nozzle 70° Full Cone Nozzle

i think i only tried the 90 flat fan on the pole,  it was the lance i tried fan an pencil.   

worst case i sack it off and get one from rutland.

Link to comment

Don't want to see ads? Become a subscribed member.


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Ad Blocker Detected

Please disable your ad blocker

Our forum relies on ads to pay for the servers and our time maintaining and running the forum.

Sadly running a forum like this is not free, and due to our popularity, we need servers that can handle the amount of traffic and resources our forum uses.

 

If you do not wish to see ads on our site, please consider supporting the forum with a membership subscription.

 

Accept