Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
I have just had a hot water system installed and they had to put a V16 controller in for me as they said my old v11 wasn't compatible.If you have a system with two controllers running a hot system and frost stat can you have a v11 and a v16 or do they both have to be the same as at the moment both my controllers are joined together with a diode for the frost stat thingy @Ian Sheppard. ?? Just wondering just in case I need to replace one in the future .
Have changed the controller and put the link on charge will pair that tomorrow as I have been busy today. Not got the immersion version as I will plug the immersion as and when needed ?Is it all fit in? What do you think is better about it than other controllers, everything working as planned?
splashing the cash Den eh!! New immersion now controller. Have you got that mastered too?
Ok thanks I have had ho5 water system for 7 years with the v11 but just wondered if one went wrong if I would have to replace both of upgradingI have just had a hot water system installed and they had to put a V16 controller in for me as they said my old v11 wasn't compatible.
Then why have you never mentioned it? ??Ok thanks I have had hot water system for 7 years
Hi Pjj good question. The diode fitted between two hot water controllers is fitted to the purple comms cable to the heater which is effectively a switch cable The diode allows the two cables to be connected to a single feed to the heater.If you have a system with two controllers running a hot system and frost stat can you have a v11 and a v16 or do they both have to be the same as at the moment both my controllers are joined together with a diode for the frost stat thingy @Ian Sheppard. ?? Just wondering just in case I need to replace one in the future .
Look forward to hearing how you find this unit and how it compares to the previous V11Will be changing out my controller for the new V16 link plus Magnetic mount tomorrow.
View attachment 23632
Thanks for that Ian much appreciated ?Hi Pjj good question. The diode fitted between two hot water controllers is fitted to the purple comms cable to the heater which is effectively a switch cable The diode allows the two cables to be connected to a single feed to the heater.
The V16 and V11 do have a number of differences and in some cases that can mean a connection as described above would means it is better to change both at the same time. If the controllers are driving separate pumps and are not joined via a diode that you could change one a time
Hope that helps
Cheers
Look forward to hearing how you find this unit and how it compares to the previous V11
Hello Ian,Hi Pjj good question. The diode fitted between two hot water controllers is fitted to the purple comms cable to the heater which is effectively a switch cable The diode allows the two cables to be connected to a single feed to the heater.
The V16 and V11 do have a number of differences and in some cases that can mean a connection as described above would means it is better to change both at the same time. If the controllers are driving separate pumps and are not joined via a diode that you could change one a time
Hope that helps
Cheers
Look forward to hearing how you find this unit and how it compares to the previous V11
Had to order from Spring as no retailer was stocking exactly what I wanted.@Den Did you buy direct from @Ian Sheppard or another supplier as I haven't seen anyone selling the V16 link with external antenna?
Hi Den. Thank you for the positive feedback and the controller has proved to be worth the wait. The Fob has default settings with the Buttons set as, Flow up , Flow Down, Pump Pause and Auto Cal from memory. The WFP link App does allow you to change the button functions. so for example you can change the Auto Cal button to switch the controller On/Off .Hello Ian,
today I used the fob more than the univalve worked flawlessly A couple of three storey houses and as I suspected it’s defo easier to press the button than to pull the univalve when working at height.
In all honestly I really like it and extremely pleased with it and how you accommodated my request ? from inquiry to finished product to my door many thanks.
one thing I would change that I noticed yesterday after doing a large lodge fully unwound hose reel I pressed the fob button it paused/work perfectly as it should but I couldn’t manually turn off using the to on/off button on the controller I had to press the fob button on then turn off with the controller button hope that makes sense hope. I have three poles On the van all with univalves and after using the new V16 link can definitely plainly see that a univalve isn’t needed when using your link, even though I had recently bought a 3 univalves they will go my my sons poles as when needed as using the v16 link is works brilliant.
the pump is smoother and quieter than my previous V11 and faceplate looks so much better than my facelift logo ? the changeout was very simply like for like with the bullet connectors.
I can honestly say that’s its a great bit of kit and recommend especially if operators have multiple poles on their van as it will save them money on univalves .
My verdict is I love it and if anyone is reading this thinking on getting the V16 link then do it I went for the magnetic mount over the normal stump antenna due to the fact my controller is tucked away and the stump antenna wouldn’t have fitted in the Allocated space.
Highly recommended V16 link and customer service which to me is as important as the product thank you @Ian Sheppard and to all the Spring team.
Praise for your products is rightly deserved ? I did notice the on/off button on the app but have not fully used it yet.Hi Den. Thank you for the positive feedback and the controller has proved to be worth the wait. The Fob has default settings with the Buttons set as, Flow up , Flow Down, Pump Pause and Auto Cal from memory. The WFP link App does allow you to change the button functions. so for example you can change the Auto Cal button to switch the controller On/Off .
On the app there are 6 buttons shown. The middle button on the bottom line allows you to turn the controller on/off via the app/
Or you can change teh button functions
http://springltd.co/assets/uploads/content/WFP_Link_App_Connection_Instructions_A4_(Similar_to_box_wrapper).pdf
In the Top right corner of the App screen there is a settings button. Press that and there is a drop down box which allows you to change the link buttons
Cheers
@Ian Sheppard just looked at the app and it took literally 10 seconds to change the fob button to turn on/off have now got my buttons-programmed to switch pause, flow up,flow down and on/offPraise for your products is rightly deserved ? I did notice the on/off button on the app but have not fully used it yet.
Didnt work today due to high winds caught up with paperwork tomorrow is forecasted the same, so will check out the link and have a play about with the fob setting.
Thanks again.
Den.
You might have talked me into getting a couple of these@Ian Sheppard just looked at the app and it took literally 10 seconds to change the fob button to turn on/off have now got my buttons-programmed to switch pause, flow up,flow down and on/off
brilliant perfect. Thanks again.
den.