Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Empty the DI stage, find out what your RO is producing might be the 6ppm that its reading, then you know when to refill your DI stage and that will polish of the rest back to 0ppm.Hi iv had my 100gal a day 3stage ro for about 10 months now it just shot up to 6ppm i know.i should chang the resin but how often for the mwmbrain im new to changing filters n stuff.... Any help would be great!
mine has booster pump on it and might be 12 plus hours depending on temps etc.How long would it take to fill a 450l tank with your 200gpd rc??
yer it has been left running for 24 hours if not a bit more non stop, the transformer gets a little warm but being outside in the shead it helps keep the frost off and keeps it from over heating,So can you keep those booster pumps running that length of time without them burning out?
I've heared that some of the chepo ones do not last so which one do you use RC?
a long time! lolI've just checked the producton rate of my 300 gpd ro and it's producing 1/2 ltr every 90 seconds.
So your homework for today is lads how long would it take to fill a 1000 ltr ibc at that production rate?
First correct anwser gets a gold star /emoticons/biggrin.png
50 hours possiblyI've just checked the producton rate of my 300 gpd ro and it's producing 1/2 ltr every 90 seconds.
So your homework for today is lads how long would it take to fill a 1000 ltr ibc at that production rate?
First correct anwser gets a gold star /emoticons/biggrin.png
i got 48% efficientCorrect /emoticons/wink.png
Next question - So being that ro it is rated at 300 us gallons per day (24 hours) how efficent is it?