Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
A few things to check; is the flow of water going in and out the correct way, did you buy new resin, did you buy a TDS meter from a reputable dealer, fill the resin to just below the neck, don't run water through full pelt, check PPM after water has flowed for a few minutes.Just got my DI vessel today, filled it to 3/4 full of resin, tested the water that came out it was 008, why wasn't it zero? What have I done wrong? My TDS reading before is 72
A few things to check; is the flow of water going in and out the correct way, did you buy new resin, did you buy a TDS meter from a reputable dealer, fill the resin to just below the neck, don't run water through full pelt, check PPM after water has flowed for a few minutes.[/QUOTMy TDS meter is a good one, the flow is correct. I'm finding it difficult to put any more resin in because the top and plastic tubing won't go back on
I'll double check that riser tube.....cheersAll the things Tuffers said + to make sure the riser tube was inserted fully into the head before reassembly.
Absolutely brill! Tis a lot faster than my attempt. Took me half an hour. Am I right in thinking you put as much resin in as poss?