CNS-southwest
Well-known member
- Messages
- 3,708
Ok so we have a section on the u bend where the washing machine drainage goes. But we use reusable cloth nappies and because the u bend is high up the waste water sits in the washing machine drainage pipe and we get a nasty wiff through the Plug hole and even on normal washes we are having drainage issues.... So there was a second connection under there further away from the sink and low down, so i connected the machine here, but its leaking every time the machine does a proper drain, the connection from grey hose to plastic is ok but it still leaks round this aswell as leaking just after the bend and where it joins the big pipe.
Pic below:
Any ideas lads??
Much appreciated
Dave
Pic below:
Any ideas lads??
Much appreciated
Dave