Jam1981
Member
- Messages
- 8
Hi
Right need some advice, going in on a budget to get started with WFP, Turning down way to much work that i can and will not do on a ladder.
This post is about RO/DI set up Help me please /emoticons/smile.png
1) How many pre filters should I use, from limited reading and photos I am thinking 2 x 20" housings/filters? or should I use 3, all so will 10" do the same job! 20" better ??? (so basic what size & how many pre filters?)
2) I will use a booster pump (4L 100psi) just a cheap one to start any one give me rough idea what i will produce realistic from a 300 GPD RO (per HR say) ?? (I am looking at filling 150/175 litre tank)
3) DI I have seen a 4.6 litre vessel, looking at the cost a cheaper option would be a 20" Housing with a DI cartridge, would this work or not (max system I am looking at is 600 GPD!)??
II hope this makes sense! & Today's TDS is 348
thank you
Right need some advice, going in on a budget to get started with WFP, Turning down way to much work that i can and will not do on a ladder.
This post is about RO/DI set up Help me please /emoticons/smile.png
1) How many pre filters should I use, from limited reading and photos I am thinking 2 x 20" housings/filters? or should I use 3, all so will 10" do the same job! 20" better ??? (so basic what size & how many pre filters?)
2) I will use a booster pump (4L 100psi) just a cheap one to start any one give me rough idea what i will produce realistic from a 300 GPD RO (per HR say) ?? (I am looking at filling 150/175 litre tank)
3) DI I have seen a 4.6 litre vessel, looking at the cost a cheaper option would be a 20" Housing with a DI cartridge, would this work or not (max system I am looking at is 600 GPD!)??
II hope this makes sense! & Today's TDS is 348
thank you