mark
Well-known member
- Messages
- 706
have already got a gutter vac with poles etc.but looking at one of the 3000w vacs on a trolley.the inlet is important as it needs to be 50mm.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
It has 2"/51mm inlet, 1000w x3 motors. I find it a PITA tbh. I have the alloy poles and when you have 6 of them connected up it's freekin hard work and even when they are clamped right up they don't seem stable to me. I'm thinking of getting carbon poles for it, but can't justify forking out £415 for 7 poles ATM. I'm not that impressed with what it sucks up either, it always seems to leave stuff behind.the one ive seen similar is a klarstein on ebay.tuffers can you tell me the diameter of the inlet & how are youi getting on with it.does it take up a lot of room in your motor?
No, you need the 135 degree hose, not sure if this is a direct link but a 90 degree won't go up , over and down into the gutter http://www.ebay.co.uk/itm/Silicone-Hose-Elbow-Bends-Silicon-Pipe-All-Sizes-Shapes-Rubber-Coolant-Water-/190886641155?var=&hash=item2c71bafe03its 90 degree silicon car hose