Just got the Moerman Excelerator

[FrontierEC]

I feel like I've wasted money.

It works really well from a pole, especially using straight downwards actions (but so does a swivel unger).

But my god, just using it as a normal squeegee is annoying. Streaks everywhere. The only way to stop that is to apply a lot of pressure, which is tiring. I spent a good few hours on it earlier. Trying different angles, rubbers, techniques, but I just can't get to grips with it.

Anyone else still struggling with it?

 

[Mattymarske]

It took me quite a long time and I was ready to chuck it away for first few years but now it's indispensable I find. Some jobs have the fliq in my holster for odd windows that need trad. Commercial work it's been godsend on the pole internally.

If it's a new one it should have the 2.0 end clips which were slightly redesigned and helped get rid of rainbow stripes. Are you coming from a brass or stainless channel and were you using it dog eared already?

 

[tench0771]

you need to cut the blue point that will stop it leaving lines so its just like the wagtail

 

[ched999uk]

I feel like I've wasted money.

It works really well from a pole, especially using straight downwards actions (but so does a swivel unger).

But my god, just using it as a normal squeegee is annoying. Streaks everywhere. The only way to stop that is to apply a lot of pressure, which is tiring. I spent a good few hours on it earlier. Trying different angles, rubbers, techniques, but I just can't get to grips with it.

Anyone else still struggling with it?

When I received mine I had the same issue. I found the issue was the stupid blue rubber. Switched to 'normal' rubber and it was great. Try some of your other rubber.

 

[FrontierEC]

It took me quite a long time and I was ready to chuck it away for first few years but now it's indispensable I find. Some jobs have the fliq in my holster for odd windows that need trad. Commercial work it's been godsend on the pole internally.

If it's a new one it should have the 2.0 end clips which were slightly redesigned and helped get rid of rainbow stripes. Are you coming from a brass or stainless channel and were you using it dog eared already?

I'm using the liquidator channel with the blue clips at the end that helps decrease the need for detailing. I haven't adjusted or modified anything.

 

[FrontierEC]

you need to cut the blue point that will stop it leaving lines so its just like the wagtail

I'm not sure what you mean here. Blue point?

 

[FrontierEC]

When I received mine I had the same issue. I found the issue was the stupid blue rubber. Switched to 'normal' rubber and it was great. Try some of your other rubber.

I tried my normal rubber I use and whilst it was better, there was still streaks. Must be the pointy blue parts at the end of the channel.

 

[ched999uk]

I tried my normal rubber I use and whilst it was better, there was still streaks. Must be the pointy blue parts at the end of the channel.

Have you tried adding soap to your applicator and then scrubbing the glass with that so you have a 'thick' soap mix?

His videos are a lot of waffle and he does like himself but Polzn Bladz on youtube is the man responsible for the end clips - well he says he is. He has lots of advice but he does take a long time to get to the point. Might be worth checking out some of his vids.