New RO high TDS!!

[Squeegee1]

Good evening people, have a problem that's driving me crazy and any advice would be very very welcome. The unit is from RO Man and mains water reading is 329. After running system for a few days it's still at 100. Have di vessel on van but was hoping for a much lower reading any ideas? Water pressure is 65 psi. /emoticons/smile.png

 

[joe34]

Had the same problem a few weeks ago after going through a new 40 40 ro it was still 80ppm, tap water was 400 plus. whats your pressure like where you are? And is it the same make ro you had before ?

I needed a ultra low ro as the first one I had was still producing high ppm after going through it.

I was driving me nuts wondering why it wasn't working properly.

 

[joe34]

Sorry just read your post all the way through 65psi is the ro low pressure?

 

[doug atkinson]

Contact RO Man as straight away he will know what the problem is

 

[Squeegee1]

Thanks lads will ring this morning

 

[Alien Human]

In my experience it's often just small tweeks that need making (which is hopefully good news)

I put the hosepipes in the wrong way in my twin DI vessels the other day e.g out to out & in to in and when things didn't then work 'smoothly' I proceeded to curse the vessels, the company, my van, life, the universe and all of the gods for a good 20mins.........until I realised the genius mistake that I had made.

 

[Squeegee1]

Sounds very familiar Alien./emoticons/smile.png