Mooghy
Well-known member
- Messages
- 50
- Location
- Miltonkeynes
I got my self a Shurflo 2095-403-444 Trail King 10 Water Pump-12V/45psi-Silver, Silver, 45 PS of amazon, iv installed it and its connected to my flow control at 80% iv got it connecter via 1/2 inch Garden hose to a 100m long 6mm hose, I get a flow but not as much as I thought it get could the pump be struggling with the pressure from going 1/2 to 6mm should I reduce it to 8mm on the out let first, if I put the pressure ip to 100% the pump over powers and dose a start stop as I'm using it so I'm assuming there's back pressure? Any advice tia