It's working then, thats good. How much water do you use?Yes it's producing 000,
Inside? It's just a plain drum with a quick change bag inside
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
It's working then, thats good. How much water do you use?Yes it's producing 000,
Inside? It's just a plain drum with a quick change bag inside
1st Gen single 6LHow much do you use? Is the resin still producing 000? Can you send a photo of inside the hydropower
I'm only new to wfp and only use it when trad is not possible,It's working then, thats good. How much water do you use?
Glad I have ros as we produce a minimum of 3,000 ltr of pure a day using that would cost a fortune , I use 1 bag of resin per year .Running just one hydropower 6L at around 65psi i noticed that the bags didn't last that long, then i refilled an OEM net bag with Tulson and averaged just shy of 2 tons,
Using two 11ltr DI's i can now achieve a far great quantity before 001ppm
I did try and point out your hard water issue there mate. It sky rockets from one area to 10 miles down the road in Ireland.I'm only new to wfp and only use it when trad is not possible,
The unger does the job but only if used on a tap with a low tds,
MY tds is between 107 and 115,
I went to a job last week and the tds on their tap was 335 which would destroy the resin if I was to connect the unger
It's good having a highly efficient RO system, Resin is ridiculous in cost unless you buy a pallet a time and then you only get a small discountGlad I have ros as we produce a minimum of 3,000 ltr of pure a day using that would cost a fortune , I use 1 bag of resin per year .
I know that now lol,I did try and point out your hard water issue there mate. It sky rockets from one area to 10 miles down the road in Ireland.
It may sound nuts to someone new to Pure water WFP but make it at home if that's the lowest reading and fill barrelsI know that now lol,
The idea is to fill drums from the low tds tap,
I was using different taps,
When I bought it I wasn't giving any advise on getting the best out of it
I have the pump and controller and the phantom pole in the van but I'm doing a lot of 3bed semi houses that can be done trad in 20 mins @€30, plus many of my customers prefer window done trad,It may sound nuts to someone new to Pure water WFP but make it at home if that's the lowest reading and fill barrels
As we all politely commented, it does look amateur rocking up with a DI at a job. We're not Yankee doodle cleaners
Thanks for all the helpful information lads,I have the pump and controller and the phantom pole in the van but I'm doing a lot of 3bed semi houses that can be done trad in 20 mins @€30, plus many of my customers prefer window done trad,
Also do first cleans, ie paint, plaster on glass and frames etc
Thanks for the advise, I have a 250 ltr container in the van,It may sound nuts to someone new to Pure water WFP but make it at home if that's the lowest reading and fill barrels
As we all politely commented, it does look amateur rocking up with a DI at a job. We're not Yankee doodle cleaners