Varistream digital

[Scots lad]

Trouble with calibratimg i know to hold both buttons for 3 seconds then going up the letters

Ive had controller to f and at no 9 but the water still comes out in continous flow of high slowing down and then sorting its self back to high

Any of you kind folks had the same problem and know a fix

Would be greatly appreciated

Controller usually works fine on c @7 as i use 100% fans

Sent using the http://Window Cleaning Forums mobile app

 

[Scots lad]

Ment to say controller shows p

Sent using the http://Window Cleaning Forums mobile app

 

[spruce]

P = shut off pressure reached.

Fan jets don't require much of a flow so 7 in my experience with the red fans of Gardiners is far to higher flow.

When I use fans on the one brush I have, I have found 4 is ample. Anything higher than that just creates 'plumes' of spray.

 

[Scots lad]

I ended up setting controller to d 6 and changing brush to one with pencil jets and working fine


Sent from my iPad using Window Cleaning Forums

 

[spruce]

I ended up setting controller to d 6 and changing brush to one with pencil jets and working fine


Sent from my iPad using Window Cleaning Forums

Pencil jets allow more water through them than fans do. If I don't have to save water 5 is a good flow rate for me but doesn't work with fans.

So if you are in water saving mode then fans will help with that. But they don't work as well as pencils when rinsing off all the little bits that are sometimes on the glass.

Honestly, I will work with fans but prefer pencils.