WFP van tank fitting and setup

[Hoops]

Hi you lot, 

I have just bought a new van for my fleet of just two to replace the larger of one of them. I have an IBC tank in my garage where I filter all my water and then pump into the vans tanks. Previously we plumbed them both into the vans using plastic pipes and fittings. I was wondering what you guys do? 

My plan is to do the following: 

1) Plumb the tank in the van using plastic fittings and flexi hose.

2) Fix my real in the centre rear of the van (always had removable reels for hose unravelling direction, I find it handy but wears u out when doing 12 jobs a day and have to constantly disconnect).

3) Hang up poles in gutter piping on vans ceilings for storage.

4) Hang up squeegee’s and mood etc on vans side walls. 

Could i please get some opinions on all of this and see your van setups? 

What do you carry day to day? 

How have you plumbed your tanks in?

thanks guys! 

 

[Pjj]

Bit untidy but works well now have two electric reels , pole storage above tank and on the right hand side  the van means you only have to open one door not both to start work