Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Commercial Cladding clean

WCF

Help Support WCF:

sambo

Well-known member
Messages
126
Does anyone have any experience of medium sized industrial unit cladding cleans? its simple white upvc plank effect but there's tons of it - around 150sq metres which is mediumly minging with algae. I know virosol and wfp will get it off but have no idea how long a job like that would take? whenever I've cleaned fascias and gutters its taken a fair while to get them to a good standard and often need to go on a ladder to detail bits and bobs so not sure how long something like this would take. - Any experience on the forum?

 
How high is it,

I just did one at the Porsche Center where I live, and it came up well wit a pressure washer! If it's low enough, use a ladder and pressure wash it...

If it's not that bad then wfp will

Be fine mate, I never bother with chemicals unless it's really really bad, just use a high flow rate and scrub away from top to bottom, we also use a normal hose while scrubbing as that way you get tonnes more water flow around the brush which will speed you up no end, one of us holds the hose and squirts it just above the brush, works a treat!

 
Pressure washing from a ladder don't sound very safe to me even at low pressure.

Out of interest what type of washer where you using @Jake ?

How high is it,
I just did one at the Porsche Center where I live, and it came up well wit a pressure washer! If it's low enough, use a ladder and pressure wash it...

If it's not that bad then wfp will

Be fine mate, I never bother with chemicals unless it's really really bad, just use a high flow rate and scrub away from top to bottom, we also use a normal hose while scrubbing as that way you get tonnes more water flow around the brush which will speed you up no end, one of us holds the hose and squirts it just above the brush, works a treat!
 
Pressure washing from a ladder don't sound very safe to me even at low pressure.
Out of interest what type of washer where you using @Jake ?
My usual one smurf, the 3650psi 15lpm Loncin, were not worried about health and saftey here old smurf,

Remember the massive building I did a while back? Haven power? We used it on that as well, did a great job, all you need to do is brace yourself and lean into the ladder when you pull the trigger for the first time... Then it's plain sailing...

Obviously if it was really high then I'd say no, but up to 15 off foot, it's all good

Appreciate it may seem unsafe, but we knew exactly what we were doing, it's fine

 
You would not catch me up a ladder using a pressure washer lance to try cleaning plastic cladding

 
Most yanks use a bleach type mix with surfactants

There are different ways to spray and rinse from down streaming using a ventura type chemical injector with a high spec washer or some like to use electric chemical pumps. For more info on the type of kit the yanks use and vids search on google for house soft washing

 

Latest Posts

Back
Top