D
DanC
Is there anyone using 1 micron sediment filters? If so is there a difference in the flow pressure when using this filter? will it slow down flow too much? Adding page links to this forum dont seem to working at the moment
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
how do you get on with them? do you notice if they slow the water down a little?I use 1 micron sediment filters only because I brought a set of filters from a chap that came with a box of spares :biggrin:
Have you noticed any flow rate difference? i am looking at the ones at http://www.eastmidlandswater.com/ then click onfilter housings insertsI use 1 micron sediment filters only because I brought a set of filters from a chap that came with a box of spares :biggrin:
so they do slow the system down a lot then. do you notice the quility of the water coming out to be any lower or just the same?I found a difference.
I have a 4040 with 2 pressure gauges on each side of the filter housings. I have a 5 micron sediment and the new carbon block is a 1 micron filter. The moment I put the new CB filter in the pressure on the second gauge dropped about 5psi. When using a CAG carbon filter, both gauges registered the same. They are 20" units.