Atlas
Member
- Messages
- 5
Hi guys just wondering do you put your cream on first then use solvent afterwards ..
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
with the ubik do you clean that off with a cloth then use magic sponge ??I spray ubik solution on and get a magic sponge out..good rinse after and job done
Most grey dirty marks on the upvc will come off with just a wipe with ubik sprayed on it and the green stuff just melts offwith the ubik do you clean that off with a cloth then use magic sponge ??
Many thanks ..Most grey dirty marks on the upvc will come off with just a wipe with ubik sprayed on it and the green stuff just melts offThe stubborn bits a magic sponge will take right off..just wet the sponge with the ubik and give it a scrub
Make sure you wash or rinse it off after as it can stain if allowed to dry i have been told..I've only managed to stain stuff with virosol though
must must get these magical spongesI spray ubik solution on and get a magic sponge out..good rinse after and job done
so all i do is add water and it takes all marks off or do i have to add something else .Try a couple of flash ones first duncs..about 1.50 in asda or a box of 2 of their own ones for a quid..you'll be surprised how good they are