Clarkus84
Well-known member
- Messages
- 238
- Location
- Ballynahinch county down
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
I see you are in Ireland do you use Benz stuff ????Yeah, I also did my first roof clean on one of those jobs.Scrape and bio brushed on using my comet pump. Luckily they were the flat tiles. I think I'm going to really try pushing it the roofs this year. Works going week by week at the moment but it's to be expected as it's still winter. I'll maybe do a Facebook advert for each service and see if I can bring anything in
No. Just hypo mixed with surfactant on the render and I used bac50 on the roof. Really, I think Benz stuff is a bit overpriced for what it is.I see you are in Ireland do you use Benz stuff ????
I have thought about it. I actually do windows at a couple of apartment blocks for a management company. Might be worth sending off an emailIf I were you I'd target the Property Management companies. Their budgets are seriously large and you're probably a lot cheaper then they've currently got.
No. Just hypo mixed with surfactant on the render and I used bac50 on the roof. Really, I think Benz stuff is a bit overpriced for what it is.
I have thought about it. I actually do windows at a couple of apartment blocks for a management company. Might be worth sending off an email
Nice work but could you explain how ye cleaned it?A few pics of a couple of nice wee jobs the past few weeks. I'd love to get more of these. How do you lads go about advertising Softwashing??
View attachment 18995
View attachment 18996
View attachment 18997
View attachment 18998
View attachment 18999
View attachment 19000
View attachment 19001
View attachment 19002
View attachment 19003
View attachment 19004
View attachment 19005
View attachment 19006
25 litres of bac 50 cost me £55. I put it on at 20/1, maybe a tad stronger with it being winter. I'm hoping to see results starting in a few months anyway. It was my first solo roof job and it was for a mate so I will be keeping a close eye on it.Yes i I agree it’s very expensive , I just thought you might have used it as it’s close to you , I mix my own , and use algk clear pro , what does the bac50 cost for 4:5 ltr and what’s the dilution rate ?. What do you think of it ?? How long before you see any results ?? Do you find it kills yellow and orange lichen on roofs ?? That’s what I have difficulty in getting rid of
25 litres of bac 50 cost me £55. I put it on at 20/1, maybe a tad stronger with it being winter. I'm hoping to see results starting in a few months anyway. It was my first solo roof job and it was for a mate so I will be keeping a close eye on it.
I will maybe leaflet the area for Softwashing jobs as the whole place is full of K-rend houses covered in algae. At least I've now got a couple of decent before and after pics
I did buy 5ltrs of algo clear pro before and it cost me about £100. Ddac is around £55 for 5ltrs near me but I was up at the chemical place and they said about the bac50 so for that price I thought why not...... Like I said though I will be keeping an eye on it. I'll do my own roof too and see how it goesDear me that’s very cheap I pay around £145 for 10 ltr of algi clear pro , mix ratios Ime the same as you , a tip I was given by a chap on hear is when mixing up bio use hot water not boiling but hot it does seam to work better especially this time of year ,
4/1 mix sprayed on a couple of times them applied and agitated with a brush before rinsing off. The staining above the door had very,very low pressure with the pressure washer on it before the final applicationNice work but could you explain how ye cleaned it?
What ratios of surfactant and hypo did you use and how did you get the job done mate? Looks awesome!No. Just hypo mixed with surfactant on the render and I used bac50 on the roof. Really, I think Benz stuff is a bit overpriced for what it is.
I have thought about it. I actually do windows at a couple of apartment blocks for a management company. Might be worth sending off an email
400ml clever wash in 25ltr 14/15% hypo. 4/1 ratio sprayed on then brushed on after and a final rinse mate. I'm finding render cleans hard to come by at the moment though ffsWhat ratios of surfactant and hypo did you use and how did you get the job done mate? Looks awesome!