Pics of your belt setup.

[TolishAPurd]

Just thought that with all the new squeegees and new folk on here that I would give this thread a little bump for a bit more gear pr0n.

 

[Jacob]

View attachment 5087 this is my current belt setup after some trial and error, but i do change the setup once in a while to keep it as simple as possible, more simple the better

 

[Eric Gilliand]

View attachment 7523 this is my current belt setup after some trial and error, but i do change the setup once in a while to keep it as simple as possible, more simple the better /emoticons/smile.png

I've resisted a belt because almost all look like "Tim the Toolman" loaded to the gunnels. Generally I carry a small squeegee in my back left pocket and a scrim stuffed into my right. Everything else in an Ettore Bucket...BUT...this one has motivated me Jacob. Very tidy sir. I like it.

 

[Jacob]

I've resisted a belt because almost all look like "Tim the Toolman" loaded to the gunnels. Generally I carry a small squeegee in my back left pocket and a scrim stuffed into my right. Everything else in an Ettore Bucket...BUT...this one has motivated me Jacob. Very tidy sir. I like it.

Thank you Eric. Glad you are inpisred /emoticons/smile.png

I dont like to have my whole trunck with me all day, this i find works very well is easy to move around with. In the unger i have spare micro cloths and a wagtail angle arm, you can reach almost every window with that xtra 20cm lol /emoticons/tongue.png

 

[Dave B]

My belt setup is excellent now..cloth in my pocket ..job done

 

[Jacob]

My belt setup is excellent now..cloth in my pocket ..job done

No one asked you Go back in the darkness :rofl:

 

[Jacob]

Any of you guys that uses a bullring? The ones made by Dangerous Dave, thinking of getting the double ringe one, and a single ring to get rid of my pouch al together. Just your experience with it /emoticons/smile.png

 

[Dave B]

I have a metal loop on my tool belt that i use for a big microfibre. .ok unless it's raining as you can't keep it dry

 

[Jacob]

Oh yes obviously didnt think of that lol. But being thats its dry most of the time i could see it handy as you dont walk around with a big clumsy pouch plus the micro will dry just sitting in the ring

 

[Eric Gilliand]

Any of you guys that uses a bullring? The ones made by Dangerous Dave, thinking of getting the double ringe one, and a single ring to get rid of my pouch al together. Just your experience with it /emoticons/smile.png

I bought a couple of cheapie torch holder belt rings with a leather domed loop. works fine. I applaud Dave's business venture but they're just too darned expensive over here...

http://www.tooled-up.com/product/maglite-leather-belt-holder-for-c-batt-torches/6266/?Referrer=tradedoubler#prettyPhoto

 

[Jacob]

Yes been thinking of doing my own too Eric, but didnt know where to start lol, they wiil cost me a small fortune too if i order them.

 

[Jacob]

Cant see your picture Eric, maybe be my ipad thats just **** lol

 

[Eric Gilliand]

Cant see your picture Eric, maybe be my ipad thats just **** lol

My bad Jacob. check the link I put up. I got mine off local auction site 2 for $10 (£6). I see they're on EBay but a little more expensive. Try a local camping or hunting supply store. Viper make one very similar but with a nylon belt loop.

http://www.ebay.co.uk/itm/Maglite-MGLASXC041-ASXC041-C-Cell-Belt-Loop-/191590073294?hash=item2c9ba883ce

 

[Jacob]

Way cheaper, but maybe its the picture but they look sort of smalish, do they fit a good size cloth

 

[boarcity]

i find that ladies bracelets are exactly the right size for carrying scrim. i got mine from charity shops. one of my lads has a brass bracelet probably made in india View attachment 5264

 

[Eric Gilliand]

Way cheaper, but maybe its the picture but they look sort of smalish, do they fit a good size cloth

No problems at all with 900x900mm scrims. The ring is about the same size as the bullrings.

 

[Jacob]

No problems at all with 900x900mm scrims. The ring is about the same size as the bullrings.

Thank for the great tip Eric with the maglite holder, i have found one online in my country, the little bigger d cell holder but who cares /emoticons/biggrin.png you saved me quite some bucks :thumbsup:

 

[armagh27]

View attachment 5185

You wear all 4 are you an octopus lol

 

[davewindowcleaner]

View attachment 5212 This is my current belt set up
From left

unger double horizontal holster with 8.5" squeegee

Regular unger pouch with a scrim and microfiber (i keep many more in my tradding trolley)

Unger ninja BOAB with scrapper and two modified jubilee clip squeegee holders, pictures is a 4.5" and the additional loop is usful when up a ladder and u want somewhere to drop any squeegee instead of changing hands, same said for the spare on the left in the leather unger holster.

Sorbo double nylon holster with 18" unger and 14" ettore

All squeegees dogeared, i keep other stuff on my trolley which i made, but thats another thread i reckon.

/emoticons/wink.png

Sorry to bring up a old thread but where did you get the Sorbo double nylon holster from?

I ask because I can't seem to find UK companies that sell them , only abroad.