johnny bravo
Well-known member
- Messages
- 2,776
- Location
- teesside
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Ball bearings become stuck, I spray wd40 on them and it works again. ?Best place to order a few of these Or anything better quality . the above seem to leak after a while doe to work load
View attachment 22542
Yeh or some grease stuff. But they only go again for a while I found. Best thing for me personally was to go onto the slick connect fittings. The ease, by comparison was amazing.Ball bearings become stuck, I spray wd40 on them and it works again. ?
have you a link. pm if needed. Its propbly just wear & tear.Yeh or some grease stuff. But they only go again for a while I found. Best thing for me personally was to go onto the slick connect fittings. The ease, by comparison was amazing.
https://www.thecleahttps://windowcleaningwarehouse.co.uk/products/exceed-bundleningwarehouse.co.uk/new-slick-2-connect-female-exceed-innovatihttps://www.windowcleaningstuff.co.uk/hose-hose-fittings-hose-reels-accessories-and-spares/1476-exceed-slick-2-connect.htmlons-6369-p.asphave you a link. pm if needed. Its propbly just wear & tear.
Yeh my reel leeks a little, only a bit after each clean, and I just keep an old towel under to soak it up. basic but plenty effective enough for me.They recommend changing Reel Tap also but that works ok. These drip when hooked up in van . Mist be great to have Leak free van.
I was chatting to a chap with 2 reels set up the other day, looked at his set up. water spillage every where. He said not bothered . its a work van he said. i thought my leaks were annoying , but his van. nightmare.
Water spillage can get into the Sills if bad. and cause rot.
Have you got a stutter? ?They recommend changing Reel Tap also but that works ok. These drip when hooked up in van . Mist be great to have Leak free van.
I was chatting to a chap with 2 reels set up the other day, looked at his set up. water spillage every where. He said not bothered . its a work van he said. i thought my leaks were annoying , but his van. nightmare.
Water spillage can get into the Sills if bad. and cause rot.
Genuine Parker ones are the best , google them but be wary on eBay as there are a lot of fake ones aboutBest place to order a few of these Or anything better quality . the above seem to leak after a while doe to work load
View attachment 22542
You can't beat genuine Parker, made down the road from meGenuine Parker ones are the best , google them but be wary on eBay as there are a lot of fake ones about
When you are passing see if you can get any free samples ???? I spend a small fortune on themYou can't beat genuine Parker, made down the road from me
They are not cheap at all. Funny how 1/4 rectus 21 bulkhead fittings are like £8 and a barb is £15+When you are passing see if you can get any free samples ???? I spend a small fortune on them
I use copper grease and I ain't changed mine in a longtime, I just buy mine from gardiners and not had any issuesYeh or some grease stuff. But they only go again for a while I found. Best thing for me personally was to go onto the slick connect fittings. The ease, by comparison was amazing.
Just google Parker rectus 21 fittingHas anyone got a link to some Parker ones, fancy having a butchers, thanks
https://www.google.com/search?q=links+&tbm=isch&ved=2ahUKEwi_p5j9-KjtAhWIwuAKHbSEAkIQ2-cCegQIABAC&oq=links+&gs_lcp=ChJtb2JpbGUtZ3dzLXdpei1pbWcQAzIECAAQQzIECAAQQzIECAAQQzICCAAyAggAOgcIABCxAxBDOgUIABCxA1DTeFisigFgzZABaABwAHgAgAGAAYgBlwSSAQMyLjOYAQCgAQHAAQE&sclient=mobile-gws-wiz-img&ei=0DPEX7__NYiFgwe0iYqQBA&bih=612&biw=360&client=ms-android-samsung-gs-rev1&prmd=inv#imgrc=3dHEkmU-v2zCEMHas anyone got a link to some Parker ones, fancy having a butchers, thanks
The tolerances with Genuine Parker Tema fittings are very high quality when compared to a cheap aftermarket clone.We sell 10x more Parker than other Rectus Type fittings. When you look at the build quality you can see the difference. What damages is grit getting in between the bearings.