Daftoldgit
Well-known member
- Messages
- 284
- Location
- Wiltshire
The bit where the short hose connects to the pole, when I swing the brush up so its parallel to the pole, quite a bit of water coming out there, how to stop it?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Not sure what you mean got a picture?The bit where the short hose connects to the pole, when I swing the brush up so its parallel to the pole, quite a bit of water coming out there, how to stop it?
Is it at the gooseneck end or the tee piece end?The bit where the short hose connects to the pole, when I swing the brush up so its parallel to the pole, quite a bit of water coming out there, how to stop it?
Replace hose, if the leaks still there it's the connectors!There's a six inch hose going from the brush to the pole, the leaks on the pole end.
@Daftoldgit make sure you push the short yellow hose firmly into the gooseneck end, aswell as at the other end where it goes to the t-piece that connects to the brush jet hose.There's a six inch hose going from the brush to the pole, the leaks on the pole end.
Just cut off a longer piece of tubing as it sounds like maybe its coming slightly loose when at full stretch so would benefit from a longer section if that makes sense.There's a six inch hose going from the brush to the pole, the leaks on the pole end.
If it is leaking at this connection then please do as follows:The bit where the short hose connects to the pole, when I swing the brush up so its parallel to the pole, quite a bit of water coming out there, how to stop it?