Finch79
Member
- Messages
- 7
- Location
- Kingston Upon Thames
I’m still very new to the trade and did a 1st clean on a house today. The house has been under complete renovation so the windows were really dirty, especially the ground floor!
I started with WFP and it was ok ish but still needed a scraper to get stubborn marks off. At the front the brush just wasn’t doing the job! I wet the windows first, used no nonsense degreaser diluted at 5L - 1 cap, agitated it, rinsed then pure water cleaned. Results weren’t great so switched to traditional as it was the only thing that seemed to work. The brush I used On the job was the gardiner Xtreme medium soft sill brush, I’m thinking this may be the wrong brush for such a job!
Is trad a better way to go when 1st cleans are really dirty? or where was I going wrong with the wfp? Or are first cleans generally tricky. advice would be great
cheers
I started with WFP and it was ok ish but still needed a scraper to get stubborn marks off. At the front the brush just wasn’t doing the job! I wet the windows first, used no nonsense degreaser diluted at 5L - 1 cap, agitated it, rinsed then pure water cleaned. Results weren’t great so switched to traditional as it was the only thing that seemed to work. The brush I used On the job was the gardiner Xtreme medium soft sill brush, I’m thinking this may be the wrong brush for such a job!
Is trad a better way to go when 1st cleans are really dirty? or where was I going wrong with the wfp? Or are first cleans generally tricky. advice would be great
cheers