Carbon gutter poles

[Johnboi]

Hi I know this subject has been debated previous but right now what carbon gutter poles would you buy????

Elite poles 40ft £1536 !!!!!!  ( With attachments)

Skyvac 40ft  £1278 (with attachments)

Gutter sucker 35ft £420 just poles extra section and rigid neck+ £234

Carbon fibre tubes. £443 just poles

Grippatank £783 Inc gooseneck/attachments

Do you need 51mm poles??? 

Is the taper fit poles enough of a pain that you will want the clamped ones??

Thanks ?

 

[scottish cleaning service]

I'm going for the 30' Elite Pole Set at around £1250. If I need a bit higher then I'll use my stepladder of not take the job on. ?

 

[Part Timer]

Do you need 51mm poles??? 

No but it will make your life a lot easier if you include a side entry vac. Front entry and smaller poles equals regular blockages which are time consuming to clear. All of the above depends on how much work you have, or intend to get. No point spending 5k+ on the best equipment if you're only doing £1k a year of gutters.

 

[NoName]

If you're going spend a chunk of cash you will kick yourself if they are a pain to use -

51mm side inlet on the vac
Poles clamps mean no annoying stuck poles 
btw it's the internal pole diameter (ID) that's key if comparing they might be thicker or tapered etc but to prevent annoying blocks you want largest internal diameters all the way thru from nozzle to vac...imo

 

[Pjj]

Hi I know this subject has been debated previous but right now what carbon gutter poles would you buy????

Elite poles 40ft £1536 !!!!!!  ( With attachments)

Skyvac 40ft  £1278 (with attachments)

Gutter sucker 35ft £420 just poles extra section and rigid neck+ £234

Carbon fibre tubes. £443 just poles

Grippatank £783 Inc gooseneck/attachments

Do you need 51mm poles??? 

Is the taper fit poles enough of a pain that you will want the clamped ones??

Thanks ?

If you are on a budget the carbon fibre tubes are very good but you will need end tools and bend on top of that price , skyvac elite poles are very good