SPCleaning
Well-known member
- Messages
- 1,359
- Location
- Devon
I cant remove the angle neck from my pole to put on an aquadapter.
Anyone got any thoughts?
Anyone got any thoughts?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
I've seen Alex Gardiner post some help for someone about how to remove one of these that's stuck (I assume it's a Type 1 Resi-Neck?). I'll see if I can find his post for you.I cant remove the angle neck from my pole to put on an aquadapter.
Anyone got any thoughts?
Apologies that you have had this issue - we can of course replace this Resi-neck for you. However first of all you will need to remove it, to do so please follow the steps below:I cant remove the angle neck from my pole to put on an aquadapter.
Anyone got any thoughts?
They have not been glued. They have been pushed in by one of the girls in the workshop. What will have happened though is with use it has for some reason become jammed. It will be the plastic binding on the plastic top clamp which is why you need to be able to hold the top clamp firmly with spanners or a mole grip and then twist the top resi neck with another spanner. Occasionally I have had a pole brought in to my workshop like this and it takes about 30 seconds to separate with the correct action.I too wondered if it had been glued.
I will have another go next weekend but expect the result will be the same. One piece stuck in the pole and the other jammed in the spanner.
Two more methods for you:Good luck with that!
Mine was soaked in wd all weekend & tried hot water & the above method, is so stuck Im worried about breaking the pole!