Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Do i need to leave the engine running whilst using the wash and reach system?

WCF

Help Support WCF:

aquadeencleaning

New member
Messages
1
Hi guys, newbie here.

So ive Brough a window cleaning van and had my 1st customer. As I was cleaning the windows I noticed the power was becoming abit slow then it stopped completely then I went to the back of the van and the pump had gone off I turned it back on then it work for a few seconds then back off again. So I turned the engine on then it worked.
Am I ment to leave the engine running whilst using this system ?

Also the left side pump doesn't pump out any water either not really too sure

Probably a really dumb question but I've gone into this a bit blind as far as the equipment goes
 

Attachments

  • 20250131_115618.jpg
    20250131_115618.jpg
    843.7 KB
No you don’t need to leave the engine running.
It could be your battery in no good or that you’re not driving for long enough for your split charge to work properly.
If I do a couple of days of big jobs with minimal driving I bench charge the leisure battery as it can drain due to not getting enough charge.
 
Back
Top