Been having a problem for a few weeks.
My flojet pump (3+ months old) is playing up, the water pressure is set at my Pure Freedom Water controller at 70-80, I like a high pressure, this works nicely for 3-4 minutes then the pressure drops to what would probably be about 40-50 for a minute or two.
I've been trouble shooting for a while but the problem still persists. so far I've done the following.
Re-wired all connections
Checked all fuses (Had to change one)
Swapped batteries
Re-calibrated numerous times.
Shortened hose length from tank to pump (less than a metre now, thought it could be a priming issue)
Any ideas what the issue could be? It doesn't slow me down too much but on a really dirty clean can be very annoying with such a low pressure trying to shift the filth off the glass.
Any ideas appreciated.
Cheers
My flojet pump (3+ months old) is playing up, the water pressure is set at my Pure Freedom Water controller at 70-80, I like a high pressure, this works nicely for 3-4 minutes then the pressure drops to what would probably be about 40-50 for a minute or two.
I've been trouble shooting for a while but the problem still persists. so far I've done the following.
Re-wired all connections
Checked all fuses (Had to change one)
Swapped batteries
Re-calibrated numerous times.
Shortened hose length from tank to pump (less than a metre now, thought it could be a priming issue)
Any ideas what the issue could be? It doesn't slow me down too much but on a really dirty clean can be very annoying with such a low pressure trying to shift the filth off the glass.
Any ideas appreciated.
Cheers