Job is a gutter clean in a valley - i did one a few rows down last week and lots of thick clay like sludge came out the gutters. The top gutter is dripping on one of the brackets continuously and a black stain has formed on the wall. Questions i have are :
1. Does the dripping most likely mean the gutter needs replacing ? (there shouldn't be a joint in that part of the gutter so i suspect it is just spilling over the top of the lowest point along the guttering)
2. Can i just softwash off the stain using some hypo / anything else ??
Expect a leak on the stain half way down the downpipe section - would this need any kind of maintenance ? Could i just tape this up to make it better for customer ?
1. Does the dripping most likely mean the gutter needs replacing ? (there shouldn't be a joint in that part of the gutter so i suspect it is just spilling over the top of the lowest point along the guttering)
2. Can i just softwash off the stain using some hypo / anything else ??
Expect a leak on the stain half way down the downpipe section - would this need any kind of maintenance ? Could i just tape this up to make it better for customer ?
Last edited by a moderator: