Join Microbore Hose

[Dabber]

I’ve a solar panel clean which may extend the reach of my 100m Microbore hose. What’s the best way to add some extra hose ?
I’ve got some 6mm brass joiners or was thinking of using a small section of hose pole but not if this will affect the pressure.
Any advice would be greatly appreciated.

 

[Mattlekim]

I have connected 2 100 meter hoses together before. Just uses rectus 21 connectors especially if you already use them. That way you can add the extra length and remove it as needed. You you get a protector like what @Skxawng sells you don't have to worry about them disconnecting while you drag them around

 

[Pjj]

As above just join two hose reels together we regularly do that on big commercial work , or add 25-30 meters of ole hose to the 100 meter microbore and turn up your flow rate will work fine , might need to adjust calibration but we haven’t had to do that .

 

[scottish cleaning service]

If its only 16 panels then you could use a trolly and and spray turn pure off scrub and pure back on to rinse.

 

[Dabber]

Thanks chaps.