looking for a3-Way Ball Valve with John Guest 1/4" Push Connect in the uk

[Dragbag]

just changed my resin and want to reduce tds creep

 

[Dave B]

I did it by using a jg y splitter and 2 normal jg taps

1 tap on each pipe after splitter

1 goes to the tank and 1 goes on the floor

Turn the floor 1 on first for a minute then close and open the 1 to the tank..job done

 

[Dragbag]

would this work ANGLE STOP VALVE | John Guest Speedfit ldy:

 

[Dave B]

That only stops the water on the 1 end that the lever is on

You need 2 of these taps and 1 splitter

View attachment 9114

View attachment 9113

 

[Dragbag]

how close do you have the taps to the splitter, im thinking you will get a degree off water tds build up in the pipe that's going to the di!?

 

[Dragbag]

this is what i was hoping to find in the uk but NOP:sad: 3-Way Ball Valve with John Guest 1/4" Push Connect

 

[Dave B]

The amount of water in a few inches of tube will make no difference to your resin mate

I have just a few inches of so of hose before the taps

I have an old 25l drum with a bad thread so lid isn't watertight which i have the other hose in so it keeps the floor dry when running off the tds spike and i empty that occasionally

 

[Den]

I have very similar to Daveyboy apart from mine goes straight into the drain.