slippy
Well-known member
- Messages
- 840
- Location
- Bournemouth
U think this would work?I've got a 1400 watt Hyundai Pro with 2200mm of water lift.
I converted my machine to a 51mm side entry cyclonic using 5mtrs of 51mm hose to cut down suction loss and this hooks onto lightweight 51mm alloy poles I got from Aquafed.
I purchased 32ft of poles and even with using the full 32ft with the end tool connected it's got plenty of suction and lifts big turfs out. I will admit that 32ft of these poles are hard to work with, need plenty upper body strength. The poles are 1.2mtrs each and weigh 620 grams, but you have the weight of the clamps and end tool to take into consideration as well.
https://www.machinemart.co.uk/p/cvac20ss-wet-dry-vacuum-cleaner/?da=1&TC=GS-050511105&gclid=Cj0KCQjw6NjNBRDKARIsAFn3NMrKwcXx_x8Bw-YKegjYTIoX-uhs0M0Ng-L-uFkg_rtwyrv7o14eYSgaAvMvEALw_wcB
Thinking of ordering the carbon fibre aqualite poles off Aqua fed who were at the show. I figured if this cheap vac from machine mart doesn't work I can still use the poles with a better vac machine.
Anyone know cheap cameras I could buy?
Last edited by a moderator: